Storing hydrofluoric acid before the invention of plastics Announcing the arrival of Valued...

Is high blood pressure ever a symptom attributable solely to dehydration?

Is the Standard Deduction better than Itemized when both are the same amount?

Does accepting a pardon have any bearing on trying that person for the same crime in a sovereign jurisdiction?

3 doors, three guards, one stone

Should I discuss the type of campaign with my players?

When to stop saving and start investing?

Letter Boxed validator

How do I mention the quality of my school without bragging

How to deal with a team lead who never gives me credit?

Is 1 ppb equal to 1 μg/kg?

How do I determine if the rules for a long jump or high jump are applicable for Monks?

Do I really need recursive chmod to restrict access to a folder?

Why don't the Weasley twins use magic outside of school if the Trace can only find the location of spells cast?

Why did the IBM 650 use bi-quinary?

How do I keep my slimes from escaping their pens?

How discoverable are IPv6 addresses and AAAA names by potential attackers?

Why is "Captain Marvel" translated as male in Portugal?

How much radiation do nuclear physics experiments expose researchers to nowadays?

Should gear shift center itself while in neutral?

Did Kevin spill real chili?

When is phishing education going too far?

Check which numbers satisfy the condition [A*B*C = A! + B! + C!]

"Seemed to had" is it correct?

What's the purpose of writing one's academic bio in 3rd person?



Storing hydrofluoric acid before the invention of plastics



Announcing the arrival of Valued Associate #679: Cesar Manara
Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern)Indonesian Chemical Olympiad: Calculating mass from predicted reactionWhat exactly is Indium's ability to stabilize non-ferrous metals?What causes the yellowing of the linear alkylbenzene (LAB) cocktail?Is this asking for the equivalence point?How were silver and gold separated using the salt cementation process?Does excessive sulfuric acid as catalyst affect the synthesis of aspirin?Material that acts as a “sponge” for sulfuric acid?What metals aren't dissolved in/attacked by aqua regia?Is Hydrogen Dioxide Water? If so, what is the chemical compound and differences between H2O and H2O2?Why was silver considered valuable in history?












3












$begingroup$


The first person to synthesize hydrofluoric acid in large quantities was Carl Wilhelm Scheele in 1771. This acid is known for its ability to corrode glass and metals.



What materials were the containers in which it was stored before the invention of plastics?










share|improve this question









New contributor




Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$








  • 1




    $begingroup$
    Iron is resistant do HF due to the formation of a dense flouride surface layer. Not sure if he used it.
    $endgroup$
    – Karl
    3 hours ago
















3












$begingroup$


The first person to synthesize hydrofluoric acid in large quantities was Carl Wilhelm Scheele in 1771. This acid is known for its ability to corrode glass and metals.



What materials were the containers in which it was stored before the invention of plastics?










share|improve this question









New contributor




Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$








  • 1




    $begingroup$
    Iron is resistant do HF due to the formation of a dense flouride surface layer. Not sure if he used it.
    $endgroup$
    – Karl
    3 hours ago














3












3








3





$begingroup$


The first person to synthesize hydrofluoric acid in large quantities was Carl Wilhelm Scheele in 1771. This acid is known for its ability to corrode glass and metals.



What materials were the containers in which it was stored before the invention of plastics?










share|improve this question









New contributor




Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$




The first person to synthesize hydrofluoric acid in large quantities was Carl Wilhelm Scheele in 1771. This acid is known for its ability to corrode glass and metals.



What materials were the containers in which it was stored before the invention of plastics?







inorganic-chemistry experimental-chemistry halides reference-request history-of-chemistry






share|improve this question









New contributor




Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 43 mins ago









andselisk

19.4k664126




19.4k664126






New contributor




Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 3 hours ago









GinasiusGinasius

1163




1163




New contributor




Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Ginasius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.








  • 1




    $begingroup$
    Iron is resistant do HF due to the formation of a dense flouride surface layer. Not sure if he used it.
    $endgroup$
    – Karl
    3 hours ago














  • 1




    $begingroup$
    Iron is resistant do HF due to the formation of a dense flouride surface layer. Not sure if he used it.
    $endgroup$
    – Karl
    3 hours ago








1




1




$begingroup$
Iron is resistant do HF due to the formation of a dense flouride surface layer. Not sure if he used it.
$endgroup$
– Karl
3 hours ago




$begingroup$
Iron is resistant do HF due to the formation of a dense flouride surface layer. Not sure if he used it.
$endgroup$
– Karl
3 hours ago










1 Answer
1






active

oldest

votes


















5












$begingroup$

In the original 1771 experiment Scheele used a very simple setup consisting of a glass retort with the glass receiver (round-bottom flask).
Yes, the glass was etched to some degree by the fumes, but it was not that drastic to destroy the apparatus.



From Lennartson's The chemical works of Carl Wilhelm Scheele [1, p. 22]:




3.1 Publication 1. Investigation of Fluorite and Hydrofluoric Acid



Original publication: Kongl. Vetenskaps Academiens Handlingar. 1771, 32,
120–138.
Original title translated to English: Investigation of fluorspar and its acid





The second paragraph of the paper deals with the action of acids on fluorite, and
this is where the important discovery is made. Scheele mixed powdered fluorite
with sulphuric acid (oil of vitriol) and heated it in a retort (Fig. 3.3) whereupon corrosive fumes were emitted. He repeated the experiment with some water in the receiver. He found that a white crust was formed on the water surface, and that the water contained a dissolved acid. The inner surface of the retort was etched by the fumes. Scheele identified the white crust as silicon dioxide (siliceous earth) and the residue in the retort as calcium sulphate (selenite or gypsum). This lead Scheele to the conclusion that “Fluor [fluorite], therefore, consists principally of calcareous earth [calcium oxide], saturated with a peculiar acid; the nature of which we shall investigate hereafter”.



Scheele's first apparatus to obtain HF
Fig. 3.3 Schematic view of the apparatus Scheele used for preparing “acid of fluorspar”




To address some critics and to proove the source of the white powder of silicon dioxide is the glassware it self, Scheele improved the setup, protecting the inner walls with tin and wax.
Further from [1, p. 98]:




3.60 Publication 60. Experiments with Hydrofluoric Acid



Original publication: Chemische Annalen für die Freunde der Naturlehre.
1786, part 1, 3–17.
Original title translated to English: New evidence for the characteristic nature of the acid of fluor spar





Scheele powdered fluorite in a brass mortar, mixed the powder with sulphuric
acid (oil of vitriol) and transferred it to a retort lined with tin. The receiver was lined with wax, and partly filled with water. This time Scheele obtained a distillate free from precipitated silicon dioxide (siliceous earth), and addition of potassium hydroxide gave no precipitate (i.e. no $ce{K2SiF6}$). Thus, this was pure hydrofluoric acid, HF (aq); similar results had been reported by Scheele’s friend, J.C.F. Meyer in Stettin.




References




  1. Lennartson, A. The Chemical Works of Carl Wilhelm Scheele; Springer Berlin Heidelberg: New York, NY, 2017. ISBN 978-3-319-58180-4.






share|improve this answer











$endgroup$









  • 2




    $begingroup$
    Super fantastic history lesson!
    $endgroup$
    – MaxW
    2 hours ago












Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "431"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});






Ginasius is a new contributor. Be nice, and check out our Code of Conduct.










draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f112825%2fstoring-hydrofluoric-acid-before-the-invention-of-plastics%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









5












$begingroup$

In the original 1771 experiment Scheele used a very simple setup consisting of a glass retort with the glass receiver (round-bottom flask).
Yes, the glass was etched to some degree by the fumes, but it was not that drastic to destroy the apparatus.



From Lennartson's The chemical works of Carl Wilhelm Scheele [1, p. 22]:




3.1 Publication 1. Investigation of Fluorite and Hydrofluoric Acid



Original publication: Kongl. Vetenskaps Academiens Handlingar. 1771, 32,
120–138.
Original title translated to English: Investigation of fluorspar and its acid





The second paragraph of the paper deals with the action of acids on fluorite, and
this is where the important discovery is made. Scheele mixed powdered fluorite
with sulphuric acid (oil of vitriol) and heated it in a retort (Fig. 3.3) whereupon corrosive fumes were emitted. He repeated the experiment with some water in the receiver. He found that a white crust was formed on the water surface, and that the water contained a dissolved acid. The inner surface of the retort was etched by the fumes. Scheele identified the white crust as silicon dioxide (siliceous earth) and the residue in the retort as calcium sulphate (selenite or gypsum). This lead Scheele to the conclusion that “Fluor [fluorite], therefore, consists principally of calcareous earth [calcium oxide], saturated with a peculiar acid; the nature of which we shall investigate hereafter”.



Scheele's first apparatus to obtain HF
Fig. 3.3 Schematic view of the apparatus Scheele used for preparing “acid of fluorspar”




To address some critics and to proove the source of the white powder of silicon dioxide is the glassware it self, Scheele improved the setup, protecting the inner walls with tin and wax.
Further from [1, p. 98]:




3.60 Publication 60. Experiments with Hydrofluoric Acid



Original publication: Chemische Annalen für die Freunde der Naturlehre.
1786, part 1, 3–17.
Original title translated to English: New evidence for the characteristic nature of the acid of fluor spar





Scheele powdered fluorite in a brass mortar, mixed the powder with sulphuric
acid (oil of vitriol) and transferred it to a retort lined with tin. The receiver was lined with wax, and partly filled with water. This time Scheele obtained a distillate free from precipitated silicon dioxide (siliceous earth), and addition of potassium hydroxide gave no precipitate (i.e. no $ce{K2SiF6}$). Thus, this was pure hydrofluoric acid, HF (aq); similar results had been reported by Scheele’s friend, J.C.F. Meyer in Stettin.




References




  1. Lennartson, A. The Chemical Works of Carl Wilhelm Scheele; Springer Berlin Heidelberg: New York, NY, 2017. ISBN 978-3-319-58180-4.






share|improve this answer











$endgroup$









  • 2




    $begingroup$
    Super fantastic history lesson!
    $endgroup$
    – MaxW
    2 hours ago
















5












$begingroup$

In the original 1771 experiment Scheele used a very simple setup consisting of a glass retort with the glass receiver (round-bottom flask).
Yes, the glass was etched to some degree by the fumes, but it was not that drastic to destroy the apparatus.



From Lennartson's The chemical works of Carl Wilhelm Scheele [1, p. 22]:




3.1 Publication 1. Investigation of Fluorite and Hydrofluoric Acid



Original publication: Kongl. Vetenskaps Academiens Handlingar. 1771, 32,
120–138.
Original title translated to English: Investigation of fluorspar and its acid





The second paragraph of the paper deals with the action of acids on fluorite, and
this is where the important discovery is made. Scheele mixed powdered fluorite
with sulphuric acid (oil of vitriol) and heated it in a retort (Fig. 3.3) whereupon corrosive fumes were emitted. He repeated the experiment with some water in the receiver. He found that a white crust was formed on the water surface, and that the water contained a dissolved acid. The inner surface of the retort was etched by the fumes. Scheele identified the white crust as silicon dioxide (siliceous earth) and the residue in the retort as calcium sulphate (selenite or gypsum). This lead Scheele to the conclusion that “Fluor [fluorite], therefore, consists principally of calcareous earth [calcium oxide], saturated with a peculiar acid; the nature of which we shall investigate hereafter”.



Scheele's first apparatus to obtain HF
Fig. 3.3 Schematic view of the apparatus Scheele used for preparing “acid of fluorspar”




To address some critics and to proove the source of the white powder of silicon dioxide is the glassware it self, Scheele improved the setup, protecting the inner walls with tin and wax.
Further from [1, p. 98]:




3.60 Publication 60. Experiments with Hydrofluoric Acid



Original publication: Chemische Annalen für die Freunde der Naturlehre.
1786, part 1, 3–17.
Original title translated to English: New evidence for the characteristic nature of the acid of fluor spar





Scheele powdered fluorite in a brass mortar, mixed the powder with sulphuric
acid (oil of vitriol) and transferred it to a retort lined with tin. The receiver was lined with wax, and partly filled with water. This time Scheele obtained a distillate free from precipitated silicon dioxide (siliceous earth), and addition of potassium hydroxide gave no precipitate (i.e. no $ce{K2SiF6}$). Thus, this was pure hydrofluoric acid, HF (aq); similar results had been reported by Scheele’s friend, J.C.F. Meyer in Stettin.




References




  1. Lennartson, A. The Chemical Works of Carl Wilhelm Scheele; Springer Berlin Heidelberg: New York, NY, 2017. ISBN 978-3-319-58180-4.






share|improve this answer











$endgroup$









  • 2




    $begingroup$
    Super fantastic history lesson!
    $endgroup$
    – MaxW
    2 hours ago














5












5








5





$begingroup$

In the original 1771 experiment Scheele used a very simple setup consisting of a glass retort with the glass receiver (round-bottom flask).
Yes, the glass was etched to some degree by the fumes, but it was not that drastic to destroy the apparatus.



From Lennartson's The chemical works of Carl Wilhelm Scheele [1, p. 22]:




3.1 Publication 1. Investigation of Fluorite and Hydrofluoric Acid



Original publication: Kongl. Vetenskaps Academiens Handlingar. 1771, 32,
120–138.
Original title translated to English: Investigation of fluorspar and its acid





The second paragraph of the paper deals with the action of acids on fluorite, and
this is where the important discovery is made. Scheele mixed powdered fluorite
with sulphuric acid (oil of vitriol) and heated it in a retort (Fig. 3.3) whereupon corrosive fumes were emitted. He repeated the experiment with some water in the receiver. He found that a white crust was formed on the water surface, and that the water contained a dissolved acid. The inner surface of the retort was etched by the fumes. Scheele identified the white crust as silicon dioxide (siliceous earth) and the residue in the retort as calcium sulphate (selenite or gypsum). This lead Scheele to the conclusion that “Fluor [fluorite], therefore, consists principally of calcareous earth [calcium oxide], saturated with a peculiar acid; the nature of which we shall investigate hereafter”.



Scheele's first apparatus to obtain HF
Fig. 3.3 Schematic view of the apparatus Scheele used for preparing “acid of fluorspar”




To address some critics and to proove the source of the white powder of silicon dioxide is the glassware it self, Scheele improved the setup, protecting the inner walls with tin and wax.
Further from [1, p. 98]:




3.60 Publication 60. Experiments with Hydrofluoric Acid



Original publication: Chemische Annalen für die Freunde der Naturlehre.
1786, part 1, 3–17.
Original title translated to English: New evidence for the characteristic nature of the acid of fluor spar





Scheele powdered fluorite in a brass mortar, mixed the powder with sulphuric
acid (oil of vitriol) and transferred it to a retort lined with tin. The receiver was lined with wax, and partly filled with water. This time Scheele obtained a distillate free from precipitated silicon dioxide (siliceous earth), and addition of potassium hydroxide gave no precipitate (i.e. no $ce{K2SiF6}$). Thus, this was pure hydrofluoric acid, HF (aq); similar results had been reported by Scheele’s friend, J.C.F. Meyer in Stettin.




References




  1. Lennartson, A. The Chemical Works of Carl Wilhelm Scheele; Springer Berlin Heidelberg: New York, NY, 2017. ISBN 978-3-319-58180-4.






share|improve this answer











$endgroup$



In the original 1771 experiment Scheele used a very simple setup consisting of a glass retort with the glass receiver (round-bottom flask).
Yes, the glass was etched to some degree by the fumes, but it was not that drastic to destroy the apparatus.



From Lennartson's The chemical works of Carl Wilhelm Scheele [1, p. 22]:




3.1 Publication 1. Investigation of Fluorite and Hydrofluoric Acid



Original publication: Kongl. Vetenskaps Academiens Handlingar. 1771, 32,
120–138.
Original title translated to English: Investigation of fluorspar and its acid





The second paragraph of the paper deals with the action of acids on fluorite, and
this is where the important discovery is made. Scheele mixed powdered fluorite
with sulphuric acid (oil of vitriol) and heated it in a retort (Fig. 3.3) whereupon corrosive fumes were emitted. He repeated the experiment with some water in the receiver. He found that a white crust was formed on the water surface, and that the water contained a dissolved acid. The inner surface of the retort was etched by the fumes. Scheele identified the white crust as silicon dioxide (siliceous earth) and the residue in the retort as calcium sulphate (selenite or gypsum). This lead Scheele to the conclusion that “Fluor [fluorite], therefore, consists principally of calcareous earth [calcium oxide], saturated with a peculiar acid; the nature of which we shall investigate hereafter”.



Scheele's first apparatus to obtain HF
Fig. 3.3 Schematic view of the apparatus Scheele used for preparing “acid of fluorspar”




To address some critics and to proove the source of the white powder of silicon dioxide is the glassware it self, Scheele improved the setup, protecting the inner walls with tin and wax.
Further from [1, p. 98]:




3.60 Publication 60. Experiments with Hydrofluoric Acid



Original publication: Chemische Annalen für die Freunde der Naturlehre.
1786, part 1, 3–17.
Original title translated to English: New evidence for the characteristic nature of the acid of fluor spar





Scheele powdered fluorite in a brass mortar, mixed the powder with sulphuric
acid (oil of vitriol) and transferred it to a retort lined with tin. The receiver was lined with wax, and partly filled with water. This time Scheele obtained a distillate free from precipitated silicon dioxide (siliceous earth), and addition of potassium hydroxide gave no precipitate (i.e. no $ce{K2SiF6}$). Thus, this was pure hydrofluoric acid, HF (aq); similar results had been reported by Scheele’s friend, J.C.F. Meyer in Stettin.




References




  1. Lennartson, A. The Chemical Works of Carl Wilhelm Scheele; Springer Berlin Heidelberg: New York, NY, 2017. ISBN 978-3-319-58180-4.







share|improve this answer














share|improve this answer



share|improve this answer








edited 43 mins ago

























answered 2 hours ago









andseliskandselisk

19.4k664126




19.4k664126








  • 2




    $begingroup$
    Super fantastic history lesson!
    $endgroup$
    – MaxW
    2 hours ago














  • 2




    $begingroup$
    Super fantastic history lesson!
    $endgroup$
    – MaxW
    2 hours ago








2




2




$begingroup$
Super fantastic history lesson!
$endgroup$
– MaxW
2 hours ago




$begingroup$
Super fantastic history lesson!
$endgroup$
– MaxW
2 hours ago










Ginasius is a new contributor. Be nice, and check out our Code of Conduct.










draft saved

draft discarded


















Ginasius is a new contributor. Be nice, and check out our Code of Conduct.













Ginasius is a new contributor. Be nice, and check out our Code of Conduct.












Ginasius is a new contributor. Be nice, and check out our Code of Conduct.
















Thanks for contributing an answer to Chemistry Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


Use MathJax to format equations. MathJax reference.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f112825%2fstoring-hydrofluoric-acid-before-the-invention-of-plastics%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

ORA-01691 (unable to extend lob segment) even though my tablespace has AUTOEXTEND onORA-01692: unable to...

Always On Availability groups resolving state after failover - Remote harden of transaction...

Circunscripción electoral de Guipúzcoa Referencias Menú de navegaciónLas claves del sistema electoral en...